PRO3660

• Four Bolts Assembly (Factory Assembly Available).
• 1.2" Thick Top.
• 16 Gauge Bench Frame Steel
• Custom Sizes Available.
• Covered with the HEAVIEST Laminate on the market.
• Aluminum sheeting at the bottom prevents warping

•  Bench Frame Steel 16 Gauge
• Available in Custom Sizes
• Covered with the HEAVIEST Laminate on the market.
• Quick Assembly
• Save Over 60% On Shipping
• 1-3/4" Top.
• Butcherblock Grading.
• Available 24”, 30”, 36”, 48” Deep and Custom.

Height: Order these benches in any desired height. View accessories page for adjustable legs.
Note: Our maple butcherblock tops are generally treated with oil for industrial assembly applications.
Read More About Butcherblock

● Save Over 60% On Shipping with This Model.
● Available 24”, 30”, 36”, 48” Deep and Custom.

ANTIMICROBIAL, WATER, AND CHEMICAL RESISTANT
Our Phenolic Resin series benches are designed specifically to be used in cleanrooms, doctor’s offices, and hospitals.

● Save Over 60% On Shipping With This Model.
● Pass ESD Association Standards.
● 1.2"; Thick Top.
● Leading The Way in ESD Since 1971.
● Bench Frame Steel 16-gauge.
● Available 24”, 30”, 36”, 48” Deep and Custom.

Click to read more details

● 1.2" Thick Top.
● 16 Gauge Bench Frame Steel
● Custom Sizes Available.
● Covered with the HEAVIEST Laminate on the market.
● Aluminum sheeting at the bottom prevents warping

ANTIMICROBIAL, WATER, AND CHEMICAL RESISTANT
Our Cleanroom Laminate series benches are designed specifically to be used in cleanrooms, doctor’s offices, and hospitals.

Square Cut Edge Top
Although these tops are our most affordable, they use the SAME HIGH-QUALITY materials as our TOP workbenches. With these tops, you can still choose from hundreds of laminate and powder paint colors.

Rounded Front Edge Top
The radiused front edge makes working at these benches easier and more comfortable, while improving productivity and contributing to a more professional looking work area.

● 1.2" Thick Top.
● 16 Gauge Bench Frame Steel
● Custom Sizes Available.
● Covered with the HEAVIEST Laminate on the market.
● Aluminum sheeting at the bottom prevents warping

ANTIMICROBIAL, WATER, AND CHEMICAL RESISTANT
Our Cleanroom Laminate series benches are designed specifically to be used in cleanrooms, doctor’s offices, and hospitals.

Square Cut Edge Top
Although these tops are our most affordable, they use the SAME HIGH-QUALITY materials as our TOP workbenches. With these tops, you can still choose from hundreds of laminate and powder paint colors.

Rounded Front Edge Top
The radiused front edge makes working at these benches easier and more comfortable, while improving productivity and contributing to a more professional looking work area.

● Save Over 60% On Shipping with This Model.
● Stainless Steel Top is Grade 304 with #4 Brushed Finish.
● The Top is Reinforced with 1-1/8" Solid Particle Board for Strength.
● Available 24”, 30”, 36”, 48” Deep and Custom.

Stainless Steel Reinforced with 1-1/8"; Solid Particle Board for Strength.
Digital Workbench Stainless Steel top benches are designed to eliminate bending or twisting. The 1-1/8" thick high density commercial grade particleboard under the Grade 304, #4 finish stainless steel is about as solid as any bench can be built.

These benches are not intended to be used in cleanroom, or for food or drug preparation.

During processing, small scratches and discoloration may appear. This is completely typical for
this material.

● 1 1/8"Thick Particleboard.
● Glides Included.
● Steel Reinforced Top.
● Holds 1200#.
● Available 24”, 30”, 36” Deep and Custom.

• Outlets are Installed in the Front or Back of the Bench Frame.
• 10' Cord Included.
• Lighted Switch and Circuit Breaker Included.

• 6” Table Height Range : 30” to 36”
• No Cross threaded Bolts.
• Heavy 5/16" Diameter Adjusting Bolts.
• Mounts on Floors.

• 12” Table Height Range : 30” to 42”
• No Cross threaded Bolts.
• Heavy 5/16" Diameter Adjusting Bolts.
• Mounts on Floors.

• Ball Bearings in Wheel Axle and Vertical Axis.
• Locks Both Axis.
• Quiet Soft Urethane Wheel Won't Mark Floors.
• All four Casters Swivel for Easy Steering.
• 700 Pound Capacity (Per Set).
• These Workbench Casters Add Approximately 5” to Workbench Height.
• Adding these casters changes the work surface height range from 30" - 36" to 35" - 41".
  

• Ball Bearings in Wheel Axle and Vertical Axis.
• Locks Both Axis.
• Quiet Soft Urethane Wheel Won't Mark Floors.
• All four Casters Swivel for Easy Steering.
• 1,200 Pound Capacity (Per Set).
• These Workbench Casters Add Approximately 6” to Workbench Height.
• Adding casters does not change the height of your bench as the factory will adjust the length of other parts to meet your requested height.
  

• Ball Bearings in Wheel.
• Ball Bearings and Vertical Axis.
• Locking Wheel + Vertical Axis.
• 3,000 Pound Capacity (Per Set).
• Set of 4 Casters.
• Phenolic caster wheels are molded under high pressure and temperature. Their hardness is comparable to traditional iron wheels.
  
• Phenolic caster wheels will wear well on concrete and are the wheel of choice for pallet jacks. Heavy standing loads will not deform these casters. These caster wheels are highly resistant to oil, grease, gasoline and mild acids. Temperature range is -40° to + 250° F.

With Plug

• Fully Slotted Top to Bottom.
• Heavy 2" Square Frame.
• Required for Adjustable Shelves, Bin Box Rails & Lights.
• Uprights are Bolted Directly into the Leg.
• Snap-on Accessories.
• Level Shelves and Accessories Without Measuring.

• Recommended Use 36" Uprights.
• ESD System not required.

• Recommended Use 48" Uprights.
• Lights are Adjustable Forward and Back, Up and Down.

• Heavy Duty Powder Coated Aluminium Enclosure.
• Conveniently Located Lighted Switch.
• Choose Between Rocker or Dimmer Switch for Custom Brightness Adjustment.
• Our Most Advanced Lighting.
• 3 Foot Cord Included.
• Color: 5,000 Kelvin. Like Fluorescent Daylight.