Step 1
Position the mounting brackets over the pre-installed screws at each end of the shelf. Ensure the bracket tabs face outward and the formed bracket sections face inward toward each other. Lower the brackets onto the screw heads, slide them forward until fully seated, and securely tighten the screws.
Step 2
With assistance from a second person, lift the shelf assembly and align the mounting tabs with the slots in the workstation uprights.
Step 3
Lower the shelf until the tabs engage the upright slots. If necessary, apply light downward pressure near the uprights to fully seat the shelf into position.
Step 4
Verify that all mounting tabs are fully engaged and that the shelf is level and securely installed before use.
