Step 1
Carefully slide the light support frame over the top section of the workstation uprights until fully seated in position.
Step 1b
Hand-tighten the adjustment knobs to secure the frame. Do not overtighten.
Step 2
For workstations equipped with a plastic-frame light fixture, proceed directly to Step 2b.
Step 2a
For steel-frame light fixtures, align the nylon mounting fasteners located on top of the light assembly with the corresponding mounting holes in the frame. Insert and securely tighten the fasteners.
Step 2b
Attach the two stainless steel mounting brackets to the horizontal support bar using the supplied bolts, lock washers, and nuts. Ensure the hardware is installed with the nut and lock washer positioned above the bar to provide proper light clearance.
Step 2c
Position the light fixture with the power switch facing forward and toward the left side of the workstation. Press the fixture firmly into the mounting brackets until fully engaged.
